A few posts ago I wrote how I took apart my spare wiper arms for powdercoat. The hinge between the arm and the hub was a steel rivet, had to drill that out. So what to do about reassembly?
Tried something this afternoon. Yeah, perhaps an over thought idea. Turned down some stainless rod to around 4.8mm, with a poofteenth narrower shoulder on each end ( the arm holes are smaller than the hub hole. Maybe it’s the paint.)
Tapped each end M3. I have some plastic pan head M3 machine screws, I’ll get some black stainless versions if I decide this is a good method. What gives me pause is I have to bend the wings of the arm apart to get the shouldered hinge pin, in the hub, inserted into arm. It’s kludgey.
But looks ok, arm moves nicely too.